Click image to view full size image
Shear and end welder
It is used to parallel cut the trail of the strip, which has just gone into the accumulator, and the head of the strip coming out of uncoiled, and then weld them together.
The unit is used to parallelly cut and weld the trail of the trial of the strip. It adopts computer-controlling system, hydraulic drive system and CO2 gas-shielding weld. When trial of steel strip comes into shear welder, alignment entity in offside clamps steel strip for orientation, cutting edge follow, finish trial sheared of steel strip. Then bridge crane move, weld sew is called out automatically. When the head of another coil entrance into the unit, alignment entity in the front clamps the steel strip and cut strip head, then bridge crane moving to position of welding torch aiming to welding sew, the right and left clamp plates make steel strip head and trial be compaction, welding torch be right position start to weld. If finished that, the system resets for next work circulation.
Strip steel width: 520mm-1220mm
Strip steel thickness: 4.0mm-12.0mm
Manual or semi-automatic operation, automatic center
Working style: two upper knives
E-mail: 